Fiberlogy HD PLA Filament - Easy to Print and Cure with ABS Similarities 1.75mm, 0.85kg (1.87lbs)

KEY FEATURES:

• Less glossy finish compared with traditional PLA
  
• Prints easy like PLA; Cures like ABS.
• Prints made with HD PLA can be cured in the oven to obtain better impact and heat resistance, similar to ABS (View PDF Curing Instructions Here)
• Made unique with raw materials approved for contact with food in compliance with EU and FDA regulations
• Engineered and created in Poland using highly specialized machinery and carefully selected raw materials

Samples Collection:

You can also order an HD PLA Sample to test from our Samples Collection ; create a custom sample pack to compare different options to find the exact right material for your project.

Double your Advantages

HD PLA gives you options.

You can use this material in two ways:

1) You can print it easily just like you would PLA and get prints featuring very good adhesion between layers and High Detail precision for intricate and complex printing situations (e.g. human models, faces, architecture, end use elements, decorative and usable items like bowls, trays; more examples below).

2) After printing, you can take the additional step to give your prints similar properties to that of ABS – better impact resistance and higher temperature resistance. All you need is an oven.

Yep, an oven!

By annealing our HD PLA in an oven, in accordance with the manual (Download HD PLA Curing Instructions Here), you will avoid all the inconveniences of printing with ABS, such as unpleasant odor or hazardous fumes.

And the best part about printing HD PLA?

For the production of this material we have chosen raw materials that are approved for food contact in compliance with the EU directive and FDA regulations. HD PLA is also certified by RoHS.

HD PLA is also designed with biodegradability in mind for environmentally freindly3D  printing.

Printing Ideas and Uses:

How to Print:

Printing temperature: 200 – 230°C

Bed temperature: 50-70°C

Closed Chamber: not required

Fan: 75-100%

Flowrate: 90-100%

Printing Speed: < 100mm/s

Surface: glass, masking tape

Retraction (direct): 2-3mm

Retraction (bowden): 4-6mm

Retraction Speed: 20-45mm/s

Notes:  HD PLA White – due to the dye, the suggested minimum printing temperature is 230°C

TDS and MSDS:

(Download HD PLA Curing Instructions Here)

All of our materials have outstanding properties and parameters - diameter tolerance of +/- 0.02mm and oval tolerance of +0.01mm.