Narrow Path 3D
FIBERLOGY PETG+PTFE Sample Size 18-30g – Low Friction and High Durability in 3D Printing, 1.75mm, 18-30g
FIBERLOGY PETG+PTFE Sample Size 18-30g – Low Friction and High Durability in 3D Printing, 1.75mm, 18-30g
Couldn't load pickup availability
FIBERLOGY PETG+PTFE - Sample Size
Key Features at a glance:
- With Fiberlogy PETG+PTFE, you can expect remarkably improved tribological properties, which means reduced friction and increased durability.
- Heat resistance up to 70°C
- Easy to print
- Chemical resistance
- Excellent layer adhesion
Durability + Low Friction
PETG+PTFE is ideal for low friction and high durability applications. Its 10% PTFE (Teflon) content results in a filament with excellent tribological properties, perfect for producing sliding elements and gears with low to moderate loads.
The material retains all the features that make PETG filament highly valued: it is easy to print, offers high adhesion, is chemically resistant and exhibits excellent impact resistance. At the same time, the addition of PTFE significantly reduces friction, resulting in enhanced durability and extended lifespan of printed components. The filament is heat-resistant up to 70°C.
PETG+PTFE is a reliable filament for engineering and industrial applications where friction reduction and wear resistance are the key factors. It is ideal for creating both functional prototypes and end-use parts.
*Tribology is the science and engineering of understanding friction, lubrication and wear phenomena for interacting surfaces in relative motion.
-
Looking for more info? Check out this article The Strongest 3D Filaments: Everything to get you started.
Printing Ideas and Applications:
- PROTOTYPES: Functional prototypes, conceptual models
- SPARE PARTS: Guides, bushings, washers, sleeves, gripping elements
- MOVING COMPONENTS: Bearings, joints, gears, axles, rollers
How to Print:
Nozzle Temperature | 220-240°C |
Bed Temperature | 90°C |
Closed chamber | not required |
Fan | 0-25% |
Flowrate | 90-95% |
Printing Speed | < 100 mm/s |
Surface | masking tape |
Drying conditions | 60°C / 4h |
Profiles | TBD |
TDS and MSDS:
Net Weight: 0.75kg
FIBERLOGY 3D Printing filament comes wound on a premium white spool in vacuum sealed bag with a desiccate packet to maintain peak conditions.
Share



